Electrostatic Powder Coating Standard Machine

The powder is moved from the powder room by the air which is found inside the hose with the pump operating on the beginning of the injector.

Flow rate air: the pump is connected by a 4/6 pneumatic hose for compressed air. Air regulators are determined by the air flow rate and the amount of pressure dust. The powder / air mixture transmitted by the air is transferred to the nozzles (electrode) in the powder transparent cabinet and the powder grains are charged with high static power. Charged dust particles adhere to the grounded cable surface.

This process is called Corona charging in the MIKRONIX group. (Negative Electron)

The process of charging the positive charges generated by friction of the powder with air flow rate and pressure with dust particles and adhering to the grounded cable is called the TRIBO charging principle. (Positron)

Powder nozzles: It can be used preferably as 1 or 2 powder nozzles.

Control panel: Each nozzle (Electrostatically) can be adjusted separately between 0-100 kv. It adjusts the powder amount, powder speed and fluidity in the manometers and the powder chamber.

The Dust cleaning unit in a 120-liter tank has 2 pieces of 125 watt residual moisture which helps in the dust removal and the dried powder is automatically transferred to the main unit by the machine.

In the cleaning part of the unit, there is a 500 micron sieve and a 300 watt vibration motor.

(Optional)

6 meters remote control panel.